Type “S” Full Port
To control the flow of Steam. Steam must be free of sediment.
NORMALLY CLOSED – 1/2″ TO 3″ PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
400°F
MAX. STATIC PRESSURE
200 PSI
OPERATION:
Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it.
CONSTRUCTION: (* Wetted parts)
*Valve Body – Cast Bronze, Globe Pattern – NPT ends
*Piston – Bronze
Coil Enclosure – Malleable or Cast Iron, 1/2 inch NPS conduit conn.
*Plunger – 430 Stainless Steel
*Pilot Valve – 303 Stainless Steel
*Bonnet Tube – 304 Stainless Steel
*Spring – Inconel
*Body Seal – Non Asbestos Gasket
*Orifice Seal – Glass Filled Teflon
*AC Shading Coil – Copper
*Stem Pin – Inconel
Coil – Encapsulated Class H, 18 inch leads
APPLICATION:
TO CONTROL THE FLOW OF STEAM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
-
Type “AR” Full Port
Magnatrol Solenoid ValvesTo control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. -
Type “M”
Magnatrol Solenoid ValvesTo control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. -
Type “W” Full Port
Magnatrol Solenoid ValvesTo control the flow of STEAM. Steam must be free of sediment. -
Type “LR” Full Port
Magnatrol Solenoid ValvesTo control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment.