Type “N”
To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment.
NORMALLY CLOSED – 1/2″ TO 3/4″ PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
212°F
MAX. STATIC PRESSURE
300 PSI
DIRECT ACTING – ORIFICE SIZES 3/32
CONSTRUCTION:(* Wetted parts)
*Valve Body – Cast Bronze, Globe Pattern – NPT ends
Coil Enclosure – Malleable Iron, 1/2” NPS conduit conn.
*Plunger – 430 Stainless Steel
*Valve Stem – 303 Stainless Steel
*Bonnet Tube – 304 Stainless Steel
*Spring – 302 Stainless Steel
*Body Seal – Buna N
*Orifice Seal – Metal to Metal
*AC Shading Coil – Copper
*Stem Pin – Inconel
Coil – Encapsulated Class B, 18” leads – (Class H available)
APPLICATION:
To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
-
Type “WR” Full Port
Magnatrol Solenoid ValvesTo control the flow of STEAM. Steam must be free of sediment. -
Type “A” Full Port
Magnatrol Solenoid ValvesTo control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. -
Type “AR” Full Port
Magnatrol Solenoid ValvesTo control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. -
Type “M”
Magnatrol Solenoid ValvesTo control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment.