Type “MR”
To control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment.
NORMALLY OPEN – 3/8″ TO 3/4″ PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
400°F
MAX. STATIC PRESSURE
150 PSI
DIRECT ACTING – ORIFICE SIZES 1/8
CONSTRUCTION:(* Wetted parts)
*Valve Body – Cast Bronze, Globe Pattern – NPT ends
Coil Enclosure – Malleable Iron, 1/2” NPS conduit conn.
*Plunger – 430 Stainless Steel
*Poppet – 304 Stainless Steel
*Stem – 303 Stainless Steel
*Bonnet Tube – 304 Stainless Steel
*Spring – Inconel
*Body Seal – Non Asbestos Gasket
*Orifice Seal – Metal to Metal
*AC Shading Coil – Copper
*Stem Pin – 304 Stainless Steel
Coil – Encapsulated Class H, 18” leads
APPLICATION:
To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-297°F), Liquid Argon (-303°F) and Liquid Nitrogen (-320°F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
-
Type “K” Full Port
Magnatrol Solenoid ValvesTo control the flow of Corrosive Fluids, Deionized Water, Condensate, Ammonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. -
Type “GR” Full Port
Magnatrol Solenoid ValvesTo control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. -
Type “LR” Full Port
Magnatrol Solenoid ValvesTo control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. -
Type “A” Full Port
Magnatrol Solenoid ValvesTo control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment.