Conservation Vents | Strata Controls

94570 Combination Conservation Vent and Flame Arrester (2″-12″ Sizes)
Flame, Deflagration & Detonation Arresters, Flame, Deflagration & Detonation Arrestors, L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC
A single, easy to configure package providing for pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point. The conservation vent features cushion seated diaphragms constructed of FEP Teflon for reliability and extended service life. For high reliability, the pressure and vacuum pallets are both peripherally and center stem guided.
94580 Combination Emergency Vent and Flame Arrester
Flame, Deflagration & Detonation Arresters, Flame, Deflagration & Detonation Arrestors, L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC
A single, easy to configure package, providing for emergency pressure venting as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flashpoint.
95021 Quick Clamp Gauge Hatch
Biogas, Biogas Shand & Jurs, Digester Cover Equipment, Gauge Hatch / Manhole, Gauge Hatch / Manhole, L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC
Designed to provide easy access to storage tanks for gauging product level or temperature and product sampling.
95210 Clamping Manhole Cover
Biogas, Biogas Shand & Jurs, Digester Cover Equipment, Gauge Hatch / Manhole, Gauge Hatch / Manhole, L&J Engineering, L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC
Designed as an economical solution that provides ready access to product storage tanks by means of an easily opened hinged cover.
95220 Clamping Manhole Cover
Biogas, Biogas Shand & Jurs, Digester Cover Equipment, Gauge Hatch / Manhole, Gauge Hatch / Manhole, L&J Engineering, L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC
Designed as an economical solution that provides ready access to product storage tanks by means of an easily opened-dome hinged cover.
95500 Cable Sheave Brackets (Open)
L&J Technology, Shand & Jurs, Swing Joints & Accessories, Swing Joints & Accessories, Tank Fittings, Flame Arrestors, Valves & ACC
Designed to operate standard or heavy duty type swing lines. The cable sheave bracket consists of a rugged base plate and an upper or load sheave. Two lower guide sheaves assure the proper alignment of the plow steel cable which passes through a cast iron stuffing box.
95506 Cable Sheave Cases (Gas Tight Types)
Shand & Jurs, Swing Joints & Accessories, Tank Fittings, Flame Arrestors, Valves & ACC
Designed to operate on pressurized product storage tanks without loss of vapors. The entire unit consists of a roof plate and three sheave cases. For ease of operation and long service life, each sheave is bushed with bronze collar bushings. Standard sheaves can accommodate cables up to 3/4" diameter. For heavier cable requirements consult factory for availability.
95661 Swing Joints
Shand & Jurs, Swing Joints & Accessories, Tank Fittings, Flame Arrestors, Valves & ACC
Permits the movement necessary in lowering the swing pipe in a swing line system. These joints are of the double elbow type, with a tongue and groove joint which retain a Teflon anti-friction thrust type washer between the swivel flanges to promote long, tight service. The two elbows are held together by a spring loaded tie rod that also has a Teflon thrust washer, plus a spring retainer for smooth action. Spring or nut-turn settings are factory set, per spring length dimension shown on table for optimum performance.
96181 Water Drain Valve
L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC, Tank Valves, Tank Valves
Designed to provide high flow capacity, leak-proof shutoff and non-freezing operation.
96311 Internal Safety Valve
L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC, Tank Valves, Tank Valves
Applicable wherever liquids are stored or transferred. It is an essential safeguard against hazards and a valuable aid in accident prevention.
96330 Internal Safety Shutoff and Operating Valve
L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC, Tank Valves, Tank Valves
Provides automatic, foolproof, quick acting shutoff, of product flow in tanks and manifold lines. Extremely versatile, it can be mounted in the tank, or in line. This valve is used most effectively for safety shutoff or operating valve in manifold lines. Its action is bi-directional with respect to flow and pressure, and its balanced piston design resists opening due to tank or line pressure.
96330I Internal Safety Shutoff and Operating Valve with Integral Position Indicator
L&J Technology, Shand & Jurs, Tank Fittings, Flame Arrestors, Valves & ACC, Tank Valves, Tank Valves
Provides automatic, foolproof, quick acting shutoff, of product flow in tanks and manifold lines. Extremely versatile, it can be mounted in the tank, or in line.

Shand & Jurs

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets